Published at Thursday, 07 December 2017 by Beverley Lloyd in Home Design, with total 36 drawings.
Home trends change along with the needs of consumers and of the general population. Modern home design aims to satisfy those changing needs by providing simplistic design with loads of storage space--a common problem found in older homes where dwellers find it impossible, or at least challenging, to store their personal items in a logical and organized manner. The design must be capable of providing such solutions for the home to be functional, and that has architects, interior designers, and builders scrambling to come up with great ideas every year.
There are few more unique lifestyles than living in an airport community. The designing of a hangar home is a unique skill and one best handled by professional designer well experienced in the subject. In this article we will cover a few specific points that you will value as suggestions to consider.
The structure over the hangar door is an important consideration. Hangar doors are usually quite wide varying from a minimum of 40 feet on up to greater than 55 feet wide. The header or beam spanning across the top of the door needs to be considered structurally. One way to handle this is by placing a steel I-beam across the door which will hold the weight of the roof. There are several disadvantages to this including higher construction costs due to the steel fabrication issues. Another disadvantage is that the beam bottom will usually fall well below the ceiling of the hangar causing the hangar door to be shorter than the ceiling height. Another, perhaps better, way to handle this is to use some sort of a gable roof or a modified gable roof over the hangar door. This allows the truss system of the roof to act as its own beam. Often the truss that spans over the door is a multi-ply truss and its bottom can be even with the ceiling height of the hangar. This allows the door to be higher and nearly the same height as the ceiling of the hangar. When designing the hangar discuss this aspect with the designer engineer who will work with you to determine the best solution.